The picture below shows the basic components needs to
check if the phone somehow doesn’t charge if the wall charger is plug-in. But
you may first ensure that the wall charger and the phone’s battery you are
using are still working. A drained battery will not charge, try to plug the
battery charger around an hour or try to replace it with a good one, to quickly
check if the battery got the problem.
So if you are experiencing any charging problem or
problem connecting your Samsung Galaxy S6 G920F to your computer via USB cable
then it is possible that your Samsung SM-G920F charging connector is faulty.
Replacing it with a new one is the only solution here. But if by any chance the
USB connector prints are broken then you have to make the jumpers as shown in
the diagram below.
Samsung Galaxy S6 G920F Charging USB Jumper Ways........................................
Clean dust on charging connector, you can do that
simply with the help of a brush.
Check whether the Charging pin in connector is in
good shape or not. In order to verify, check voltage at the first pin and it
should be 5V. If it isn’t then it means that the pin is broken from inside. You
can check it after connecting charger.
If the Pin is broken, change the Pin and Check
voltage again.
Check above mentioned Charging ways. If you find any
problem or broken any ways then apply jumper.
No comments:
Post a Comment