Fixing iPhone 6S Plus back-light repair with jumper

iPhone 6s may be the cause of no backlight is not working. when you open your mobile. then you see your mobile is open but the LCD is black.

Cheak
For iPhone 6s Ringer Solution Bridge Problem Solution Ways use the diagram below. If there is any water or rust damage on the base plate, then clean with electronic air cleaner for hot air for a few minutes of mint so it can be dry. Check the light point after opening the mobile. if the light point is not working and its value is not right then Make sure this Jumper. problem will be problem resolved. if it will not solve then check the light point Onboard. If there value is not to the right then check the parts and components with the path there from the diagram above. If missing some path then apply the bridge. If any part and components are not working, replace it with a new one.

iPhone 7 Ringer Solution Jumper Problem Ways

iPhone 7 may be the cause of no Voice Ringtones and also no loudspeaker calls. then we can not use the loudspeaker and we can not play the ringtone cause ringtone ring ring ring can also below. For iPhone 7 Ringer Solution Bridge Problem Solution Ways use the diagram below.

If there is any water or rust damage on the base plate, then clean with electronic air cleaner for hot air for a few minutes of mint so it can be dry. Check the ringer point after opening the mobile. if ringers point is not working and its value is not right then replace it with new ringer.problem will be problem resolved. if it will not solve then check the ringers point Onboard. If there value is not to the right then check the parts and components with the path there from the diagram above. If missing some path then apply the bridge. If any part and components are not working, replace it with a new one.

Sony Xperia X8 LCD Display Light IC Solution

if LCD light is not working in Sony Xperia X8 then we will not be able to watch any text on display. Light can be dim or may be blank. Sony Xperia X8 LCD Display Light IC Solution Jumper Problem Ways can be solving in a few steps as given in this post.

After dish assembling Sony Xperia X8 cheek mother board if there is any carbon water damage or rust. Clean whole board with electronics cleaner and then apply hot air for a few mints so that it can be dry.

Replace led if it is a jack LCD and if it is pasted then after removing check its prints value. if value is ok then replace LCD and if aloe is missing then check whole parts components as even in above diagram. Check all paths and if any tracks of them are missing apply jumpers.

It will help you to solve Sony Xperia X8 LCD Display Light IC Solution Jumper Problem Ways easily.

For more information and new tips and tricks about this problem solution keep visiting this page we will update it if there will be new updates. Some related post are also given below you can read more about mobile phone.

Nokia Lumia 900 LCD Display Light IC Solution

If LCD light is not working in Nokia Lumia 900 then we will not be able to watch any text on display. light can be dim or may be blank. Nokia Lumia 900 LCD Display Light IC Solution Jumper Problem Ways can be solve in a few steps as given in this post.

After dish assembling Nokia Lumia 900 cheek mother board if there is any carbon water damage or rust. Clean whole board with electronics cleaner and then apply hot air for a few mints so that it can be dry.

replace led if it is a jack LCD and if it is pasted then after removing check its prints value.if value is ok then replace LCD and if aloe is missing then check whole parts components as even in above diagram. Check all paths and if any tracks of them are missing apply jumpers.

it will help you to solve Nokia Lumia 900 LCD Display Light IC Solution Jumper Problem Ways
Easley.

For more information and new tips and tricks about this problem solution keep visiting this page we will update it if there will be new updates. Some related post are also given below you can read more about mobile phone.

Samsung Galaxy Tab 3 7.0 SM-T210 Charging Solution

Samsung Galaxy Tab 3 

Charging problem in Samsung Galaxy Tab 3 7.0 SM-T210 can be due to charging pin broken damage and due to water damages. in case of charging problem mobile cannot save power in battery and may it shows fake charging in it. in fake charging condition you can only see charging signee in mobile but it will not save any electricity power in it.

to sole charging problem Samsung Galaxy Tab 3 7.0 SM-T210 Charging Solution Jumper Problem Ways Charging Not Supported after disassembly of mobile phone you have to do a few steps as shown in above diagram. check charging jack and its points do they have good value if yes then change charger and check it and if charging points at mother board do not show accurate value with meter then you have to check all parts and tracks that are given in diagram of Samsung Galaxy Tab 3 7.0 SM-T210.

Look at mother board vary carefully if there is any rust or carbon and water damage or may any component is damage. if any track is missing apply jumpers as given and if any part is damage or broken then replace it with new one.

SAMSUNG GALAXY S6 G920F CHARGING JUMPER SOLUTION WAYS

The picture below shows the basic components needs to check if the phone somehow doesn’t charge if the wall charger is plug-in. But you may first ensure that the wall charger and the phone’s battery you are using are still working. A drained battery will not charge, try to plug the battery charger around an hour or try to replace it with a good one, to quickly check if the battery got the problem.

So if you are experiencing any charging problem or problem connecting your Samsung Galaxy S6 G920F to your computer via USB cable then it is possible that your Samsung SM-G920F charging connector is faulty. Replacing it with a new one is the only solution here. But if by any chance the USB connector prints are broken then you have to make the jumpers as shown in the diagram below.

Samsung Galaxy S6 G920F Charging USB Jumper Ways........................................

Clean dust on charging connector, you can do that simply with the help of a brush.

Check whether the Charging pin in connector is in good shape or not. In order to verify, check voltage at the first pin and it should be 5V. If it isn’t then it means that the pin is broken from inside. You can check it after connecting charger.

If the Pin is broken, change the Pin and Check voltage again.

Check above mentioned Charging ways. If you find any problem or broken any ways then apply jumper.