Total Pageviews
Showing posts with label Solution. Show all posts
Showing posts with label Solution. Show all posts
Sunday, 22 September 2019
Fixing iPhone 6S Plus back-light repair with jumper
iPhone 6s may be the cause of no backlight is not working. when you open your mobile. then you see your mobile is open but the LCD is black.
Cheak
For iPhone 6s Ringer Solution Bridge Problem Solution Ways use the diagram below. If there is any water or rust damage on the base plate, then clean with electronic air cleaner for hot air for a few minutes of mint so it can be dry. Check the light point after opening the mobile. if the light point is not working and its value is not right then Make sure this Jumper. problem will be problem resolved. if it will not solve then check the light point Onboard. If there value is not to the right then check the parts and components with the path there from the diagram above. If missing some path then apply the bridge. If any part and components are not working, replace it with a new one.
iPhone 7 Ringer Solution Jumper Problem Ways
iPhone 7 may be the cause of no Voice Ringtones and also no loudspeaker calls. then we can not use the loudspeaker and we can not play the ringtone cause ringtone ring ring ring can also below. For iPhone 7 Ringer Solution Bridge Problem Solution Ways use the diagram below.
If there is any water or rust damage on the base plate, then clean with electronic air cleaner for hot air for a few minutes of mint so it can be dry. Check the ringer point after opening the mobile. if ringers point is not working and its value is not right then replace it with new ringer.problem will be problem resolved. if it will not solve then check the ringers point Onboard. If there value is not to the right then check the parts and components with the path there from the diagram above. If missing some path then apply the bridge. If any part and components are not working, replace it with a new one.
Saturday, 20 February 2016
Galaxy S5 A500F Charging Solution Ways Jumper
Samsung Galaxy S5 A500F Not Charging
Problem Solution Charging problem is really not a common one, but when it
happens you really know that you are going to have a very bad time! Samsung
SM-A500F Charging problem can occur due to any of the reasons; it could either
be due to water damage or physical damage in the following lines you will get
to know simple and effective troubleshooting methods to overcome Samsung Galaxy
S5 Charging problems. Resolving charging problem…
Normally
Samsung Galaxy S5 A500F charging problem is due to faulty charging connector,
and in order to overcome that, all you have to do is to…Remove Battery cover,
Battery and C cover, and then check charging connector’s pins. First Clean and
remount all the pins of charging connector. Put Battery in again and connect
charger.
Hardware Solution
DEMO |
Monday, 15 February 2016
Usb Charging Problem Solution Ways to Samsung Galaxy J1 J100H
Samsung Galaxy J1 J100H Usb Charging
Problem Solution Ways
Samsung Galaxy J1 SM-J100H Charging Ways Solution Jumper Problem Repair Today we will discuss the issues on
charging or charging Samsung Galaxy J1 J100H, charging or charging problems
often experienced by all cell phone brands in this world, this problem would
make the dead lice or mobile phone users gadgets. Damage to the charging
Samsung J100H usually occurs because the plugins that have been damaged. Here
are the steps to solve charging problem.
Sunday, 15 November 2015
HTC one M8 LCD/Display Light IC Solution
If LCD light is not working in HTC one
M8 then we will not be able to watch any text on display. light can be dim or
may be blank.HTC one M8 LCD Display Light IC Solution Jumper Problem Ways can
be solve in a few steps as given in this post.
After disassembling HTC one M8 cheek mother board if there is any carbon water damage or rust. Clean whole board with electronics cleaner and then apply hot air for a few mints so that it can be dry.
Replace led if it is a jack LCD and if
it is pasted then after removing check its prints value. If value is ok then replace
LCD and if aloe is missing then check whole parts components as even in above diagram.
Check all paths and if any tracks of them are missing apply jumpers.
It will help you to solve HTC one M8 LCD
Display Light IC Solution Jumper Problem Ways easily.
Monday, 2 November 2015
Sony Xperia X8 LCD Display Light IC Solution
if LCD light is not working in Sony Xperia X8 then
we will not be able to watch any text on display. Light can be dim or may be blank.
Sony Xperia X8 LCD Display Light IC Solution Jumper Problem Ways can be solving
in a few steps as given in this post.
After dish assembling Sony Xperia X8 cheek mother board if there is any carbon
water damage or rust. Clean whole board with electronics cleaner and then apply
hot air for a few mints so that it can be dry.
Replace led if it is a jack LCD and if it is pasted
then after removing check its prints value. if value is ok then replace LCD and
if aloe is missing then check whole parts components as even in above diagram. Check
all paths and if any tracks of them are missing apply jumpers.
It will help you to solve Sony Xperia X8 LCD Display
Light IC Solution Jumper Problem Ways easily.
For more information and new tips and tricks about
this problem solution keep visiting this page we will update it if there will
be new updates. Some related post are also given below you can read more about
mobile phone.
Labels:
Blank lcd,
Blinking Display,
Display,
Display Light Solution,
Display Light Ways,
Jumper,
lcd Jumpers,
LCD Light,
lcd Light Problem,
Nokia,
Problem,
Solution,
Sony Xperia X8,
Ways,
White Display
Sony Xperia Z Ultra LCD Display Light IC Solution
If LCD light is not working in Sony Xperia Z Ultra
then we will not be able to watch any text on display. light can be dim or may
be blank. Sony Xperia Z Ultra LCD Display Light IC Solution Jumper Problem Ways
can be solve in a few steps as given in this post.
After dish assembling Sony Xperia Z Ultra cheek mother board if there is any carbon water damage or rust. Clean whole board with electronics cleaner and then apply hot air for a few mints so that it can be dry.
Replace led if it is a jack LCD and if it is pasted
then after removing check its prints value. if value is ok then replace LCD and
if aloe is missing then check whole parts components as even in above diagram. Check
all paths and if any tracks of them are missing apply jumpers.
it will help you to solve Sony Xperia Z Ultra LCD
Display Light IC Solution Jumper Problem Ways
easily.
easily.
Nokia Lumia 900 LCD Display Light IC Solution
If LCD light is not working in Nokia Lumia 900 then
we will not be able to watch any text on display. light can be dim or may be
blank. Nokia Lumia 900 LCD Display Light IC Solution Jumper Problem Ways can be
solve in a few steps as given in this post.
After dish assembling Nokia Lumia 900 cheek mother board if there is any carbon water damage or rust. Clean whole board with electronics cleaner and then apply hot air for a few mints so that it can be dry.
replace led if it is a jack LCD and if it is pasted
then after removing check its prints value.if value is ok then replace LCD and
if aloe is missing then check whole parts components as even in above diagram. Check
all paths and if any tracks of them are missing apply jumpers.
it will help you to solve Nokia Lumia 900 LCD
Display Light IC Solution Jumper Problem Ways
Easley.
Easley.
For more information and new tips and tricks about this problem solution keep visiting this page we will update it if there will be new updates. Some related post are also given below you can read more about mobile phone.
Labels:
Blank Display,
Blinking Display,
Display,
Display Light Problem,
Display Light Ways,
Jumper,
Keypad Light,
LCD,
LCD Display Light,
Nokia,
Nokia Lumia 900,
Problem,
Solution,
White Display
Sunday, 1 November 2015
Samsung Galaxy Tab 3 7.0 SM-T210 Charging Solution
Samsung Galaxy Tab 3 |
Charging problem in Samsung Galaxy Tab 3
7.0 SM-T210 can be due to charging pin broken damage and due to water damages.
in case of charging problem mobile cannot save power in battery and may it
shows fake charging in it. in fake charging condition you can only see charging
signee in mobile but it will not save any electricity power in it.
to sole charging problem Samsung Galaxy Tab 3 7.0 SM-T210 Charging Solution
Jumper Problem Ways Charging Not Supported after disassembly of mobile phone you have to do a few steps as shown in above diagram.
check charging jack and its points do they have good value if yes then change charger
and check it and if charging points at mother board do not show accurate value
with meter then you have to check all parts and tracks that are given in
diagram of Samsung Galaxy Tab 3 7.0 SM-T210.
Look at mother board vary carefully if
there is any rust or carbon and water damage or may any component is damage. if
any track is missing apply jumpers as given and if any part is damage or broken
then replace it with new one.
Thursday, 29 October 2015
SAMSUNG GALAXY S6 G920F CHARGING JUMPER SOLUTION WAYS
The picture below shows the basic components needs to
check if the phone somehow doesn’t charge if the wall charger is plug-in. But
you may first ensure that the wall charger and the phone’s battery you are
using are still working. A drained battery will not charge, try to plug the
battery charger around an hour or try to replace it with a good one, to quickly
check if the battery got the problem.
So if you are experiencing any charging problem or
problem connecting your Samsung Galaxy S6 G920F to your computer via USB cable
then it is possible that your Samsung SM-G920F charging connector is faulty.
Replacing it with a new one is the only solution here. But if by any chance the
USB connector prints are broken then you have to make the jumpers as shown in
the diagram below.
Samsung Galaxy S6 G920F Charging USB Jumper Ways........................................
Clean dust on charging connector, you can do that
simply with the help of a brush.
Check whether the Charging pin in connector is in
good shape or not. In order to verify, check voltage at the first pin and it
should be 5V. If it isn’t then it means that the pin is broken from inside. You
can check it after connecting charger.
If the Pin is broken, change the Pin and Check
voltage again.
Check above mentioned Charging ways. If you find any
problem or broken any ways then apply jumper.
Subscribe to:
Posts (Atom)