Galaxy A3 A300F Charging Problem Solution

Samsung Galaxy A3 A300F Charging Problem Solution SM-A300F Charging Solution Jumper Problem Ways Charging Not Supported….

This is a Samsung Galaxy A3 A300F solution for the Charging Problem or if the phone shows no charging indication when the battery charger is plug-in. The solution below shows the primary component that needs to be check if the charging problem occurred.

Just refer to it and locate the highlighted components then follow some simple procedures we provide below.

Please note that we will edit these solutions or add new ones if found on this page at any time in the future. So feel free to come back any time on this page to stay up to date.

 

DEMO

Hardware Solution for Samsung Galaxy A3 A300F Not Charging Problem

Galaxy S5 A500F Charging Solution Ways Jumper

Samsung Galaxy S5 A500F Not Charging Problem Solution Charging problem is really not a common one, but when it happens you really know that you are going to have a very bad time! Samsung SM-A500F Charging problem can occur due to any of the reasons; it could either be due to water damage or physical damage in the following lines you will get to know simple and effective troubleshooting methods to overcome Samsung Galaxy S5 Charging problems. Resolving charging problem…

Normally Samsung Galaxy S5 A500F charging problem is due to faulty charging connector, and in order to overcome that, all you have to do is to…Remove Battery cover, Battery and C cover, and then check charging connector’s pins. First Clean and remount all the pins of charging connector. Put Battery in again and connect charger.

Hardware Solution

DEMO

Samsung Galaxy Tab 2 7.0 P3100 Charging Solution

 Charging problem in Samsung Galaxy Tab 2 7.0 P3100 can be due to charging pin broken damage and due to water damages. In case of charging problem mobile cannot save power in battery and may it shows fake charging in it. in fake charging condition you can only see charging signee in mobile but it will not save any electricity power in it.

Samsung Galaxy Tab 2 7.0 P3100

To sole charging problem Samsung Galaxy Tab 2 7.0 P3100 Charging Solution Jumper Problem Ways Charging Not Supported after disassembly of mobile phone you have to do a few steps as shown in above diagram. check charging jack and its points do they have good value if yes then change charger and check it and if charging points at mother board do not show accurate value with meter then you have to check all parts and tracks that are given in diagram of Samsung Galaxy Tab 2 7.0 P3100.

Look at mother board vary carefully if there is any rust or carbon and water damage or May any component is damage. If any track is missing apply jumpers as given and if any part is damage or broken then replace it with new one.

Samsung Galaxy Tab 3 7.0 SM-T210 Charging Solution

Samsung Galaxy Tab 3 

Charging problem in Samsung Galaxy Tab 3 7.0 SM-T210 can be due to charging pin broken damage and due to water damages. in case of charging problem mobile cannot save power in battery and may it shows fake charging in it. in fake charging condition you can only see charging signee in mobile but it will not save any electricity power in it.

to sole charging problem Samsung Galaxy Tab 3 7.0 SM-T210 Charging Solution Jumper Problem Ways Charging Not Supported after disassembly of mobile phone you have to do a few steps as shown in above diagram. check charging jack and its points do they have good value if yes then change charger and check it and if charging points at mother board do not show accurate value with meter then you have to check all parts and tracks that are given in diagram of Samsung Galaxy Tab 3 7.0 SM-T210.

Look at mother board vary carefully if there is any rust or carbon and water damage or may any component is damage. if any track is missing apply jumpers as given and if any part is damage or broken then replace it with new one.

SAMSUNG GALAXY S6 G920F CHARGING JUMPER SOLUTION WAYS

The picture below shows the basic components needs to check if the phone somehow doesn’t charge if the wall charger is plug-in. But you may first ensure that the wall charger and the phone’s battery you are using are still working. A drained battery will not charge, try to plug the battery charger around an hour or try to replace it with a good one, to quickly check if the battery got the problem.

So if you are experiencing any charging problem or problem connecting your Samsung Galaxy S6 G920F to your computer via USB cable then it is possible that your Samsung SM-G920F charging connector is faulty. Replacing it with a new one is the only solution here. But if by any chance the USB connector prints are broken then you have to make the jumpers as shown in the diagram below.

Samsung Galaxy S6 G920F Charging USB Jumper Ways........................................

Clean dust on charging connector, you can do that simply with the help of a brush.

Check whether the Charging pin in connector is in good shape or not. In order to verify, check voltage at the first pin and it should be 5V. If it isn’t then it means that the pin is broken from inside. You can check it after connecting charger.

If the Pin is broken, change the Pin and Check voltage again.

Check above mentioned Charging ways. If you find any problem or broken any ways then apply jumper.