Fixing iPhone 6S Plus back-light repair with jumper

iPhone 6s may be the cause of no backlight is not working. when you open your mobile. then you see your mobile is open but the LCD is black.

Cheak
For iPhone 6s Ringer Solution Bridge Problem Solution Ways use the diagram below. If there is any water or rust damage on the base plate, then clean with electronic air cleaner for hot air for a few minutes of mint so it can be dry. Check the light point after opening the mobile. if the light point is not working and its value is not right then Make sure this Jumper. problem will be problem resolved. if it will not solve then check the light point Onboard. If there value is not to the right then check the parts and components with the path there from the diagram above. If missing some path then apply the bridge. If any part and components are not working, replace it with a new one.

iPhone 7 Ringer Solution Jumper Problem Ways

iPhone 7 may be the cause of no Voice Ringtones and also no loudspeaker calls. then we can not use the loudspeaker and we can not play the ringtone cause ringtone ring ring ring can also below. For iPhone 7 Ringer Solution Bridge Problem Solution Ways use the diagram below.

If there is any water or rust damage on the base plate, then clean with electronic air cleaner for hot air for a few minutes of mint so it can be dry. Check the ringer point after opening the mobile. if ringers point is not working and its value is not right then replace it with new ringer.problem will be problem resolved. if it will not solve then check the ringers point Onboard. If there value is not to the right then check the parts and components with the path there from the diagram above. If missing some path then apply the bridge. If any part and components are not working, replace it with a new one.

Nokia Lumia 610 Power On Off Key Solution

Nokia Lumia 610 In the power ON-OFF, other than it is in the matrix keyboard flex is also connected to the keyboard filter IC. The solution below shows the connection line paths of the power key, this is useful without changing the filter IC and this can be used without having to connect the power key filter IC.

Just refer to the solution given below and track said main power line roads.

Only manage to apply a jumper wire in places where the Nokia Lumia 610 connecting said power key. This can help change without compromising the IC filter matrix or keyboard flex.

Sony Xperia X8 LCD Display Light IC Solution

if LCD light is not working in Sony Xperia X8 then we will not be able to watch any text on display. Light can be dim or may be blank. Sony Xperia X8 LCD Display Light IC Solution Jumper Problem Ways can be solving in a few steps as given in this post.

After dish assembling Sony Xperia X8 cheek mother board if there is any carbon water damage or rust. Clean whole board with electronics cleaner and then apply hot air for a few mints so that it can be dry.

Replace led if it is a jack LCD and if it is pasted then after removing check its prints value. if value is ok then replace LCD and if aloe is missing then check whole parts components as even in above diagram. Check all paths and if any tracks of them are missing apply jumpers.

It will help you to solve Sony Xperia X8 LCD Display Light IC Solution Jumper Problem Ways easily.

For more information and new tips and tricks about this problem solution keep visiting this page we will update it if there will be new updates. Some related post are also given below you can read more about mobile phone.

Nokia Lumia 900 LCD Display Light IC Solution

If LCD light is not working in Nokia Lumia 900 then we will not be able to watch any text on display. light can be dim or may be blank. Nokia Lumia 900 LCD Display Light IC Solution Jumper Problem Ways can be solve in a few steps as given in this post.

After dish assembling Nokia Lumia 900 cheek mother board if there is any carbon water damage or rust. Clean whole board with electronics cleaner and then apply hot air for a few mints so that it can be dry.

replace led if it is a jack LCD and if it is pasted then after removing check its prints value.if value is ok then replace LCD and if aloe is missing then check whole parts components as even in above diagram. Check all paths and if any tracks of them are missing apply jumpers.

it will help you to solve Nokia Lumia 900 LCD Display Light IC Solution Jumper Problem Ways
Easley.

For more information and new tips and tricks about this problem solution keep visiting this page we will update it if there will be new updates. Some related post are also given below you can read more about mobile phone.

HTC One X Charging Solution

Charging problem in HTC One X can be due to charging pin broken damage and due to water damages. In case of charging problem mobile cannot save power in battery and May it shows fake charging in it. in fake charging condition you can only see charging signer in mobile but it will not save any electricity power in it.

To sole charging problem HTC One X Charging Solution Jumper Problem Ways Charging Not Supported after disassemble of mobile phone you have to do a few steps as shown in above diagram. Check charging jack and its points do they have good value if yes then change charger and check it and if charging points at mother board do not show accurate value with meter then you have to check all parts and tracks that are given in diagram of HTC One X.

Look at mother board vary carefully if there is any rust or carbon and water damage or May any component is damage. if any track is missing apply jumpers as given and if any part is damage or broken then replace it with new one.

For more information and new tips and tricks about this problem solution keep visiting this page we will update it if there will be new updates. Some related post are also given below you can read more about mobile phone.

Please note that although every diagram & solution posted on our website has been tested by one or more members of our team before posting, so we will not be responsible for any loss or damage, including personal injury. Use these repair solutions at your own risk.

Samsung Galaxy Tab 2 7.0 P3100 Charging Solution

 Charging problem in Samsung Galaxy Tab 2 7.0 P3100 can be due to charging pin broken damage and due to water damages. In case of charging problem mobile cannot save power in battery and may it shows fake charging in it. in fake charging condition you can only see charging signee in mobile but it will not save any electricity power in it.

Samsung Galaxy Tab 2 7.0 P3100

To sole charging problem Samsung Galaxy Tab 2 7.0 P3100 Charging Solution Jumper Problem Ways Charging Not Supported after disassembly of mobile phone you have to do a few steps as shown in above diagram. check charging jack and its points do they have good value if yes then change charger and check it and if charging points at mother board do not show accurate value with meter then you have to check all parts and tracks that are given in diagram of Samsung Galaxy Tab 2 7.0 P3100.

Look at mother board vary carefully if there is any rust or carbon and water damage or May any component is damage. If any track is missing apply jumpers as given and if any part is damage or broken then replace it with new one.

Samsung Galaxy S6 SM-G920F Mic Solution Jumper Problem Ways Microphone

Samsung Galaxy S6 SM-G920F Mic problem can be solving in a few steps as given in this post. How we can find Mic fault into a cell phone is very easy way. Whenever our voice cannot reach to destination mobile phone or we cannot record our own voice in voice recorder of cell phone it means it Mic not working. If a Samsung Galaxy S6 SM-G920F Mic is not working then Mic problem can be solve in given bellow steps that are provided in diagram bellow.

First step is open mobile and check Samsung Galaxy S6 SM-G920F Mic points on board if there is a good value in it then change Mic with new one. Problem will be solving. if only Mic points do not show value then cheek all Mic track and parts that are used in Mic function in Samsung Galaxy S6 SM-G920F. All Mic parts and track are given in bellow diagram check all these parts and components and if necessary resold or change them. This will help you in Samsung Galaxy S6 SM-G920F Mic Solution Jumper Problem Ways Microphone

For more information and new tips and tricks about this problem solution keep visiting this page we will update it if there will be new updates. Some related post are also given below you can read more about mobile phone.

Please note that although every diagram & solution posted on our website has been tested by one or more members of our team before posting, so we will not be responsible for any loss or damage, including personal injury. Use these repair solutions at your own risk.